Design, Supply & Install Water Mist Indoor 1 Mist Head Suppression System

The Watermist Auto-Quell System is a revolutionary, all-purpose detection and fire suppressant system solution. The system is designed for large spaces and uses a water reservoir supported by a water pump to continuously supply water into the system over a long period of time.

In the event of a fire, the system kicks into action in seconds where specially designed nozzles dispense fine mist into the fire zone. This fine mist also known as watermist is made up of microscopic droplets of water (below 100 microns), when dispersed onto the fire-affected area, quickly puts out the flames and brings the temperature down to non-combustion levels. Entirely self-activated and requiring no human intervention, this integrated system provides a complete detection and suppression solution, working quickly to save property and lives. What's more, since the Auto-Quell System is watermist based, it has no long-term effect on the work environment and operations can resume with no time lost.

Product Features:

Classification:

Works on A, B, C and Electrical Fires, and is suitable for a variety of spaces.

Self-Actuating:

Featuring an in-built detection mechanism that leads to instant and automatic activation, the system eliminates the need for human intervention.

24x7 Protection:

Being automated, the system is in a perpetual state of readiness to combat a fire as soon as it breaks out.

Extended Reach:

Includes flexible piping that can reach difficult-to-access areas that may not be able to accommodate any other means of detection.

Quick Installation:

Simple design, and can be installed within a few hours, which means a significant reduction in labour costs and downtime.

Long-Lasting:

Its rugged quality ensures it can withstand even harsh conditions where other types of detection systems might be rendered inadequate.

Environmentally Friendly:

Unlike other fire fighting agents like Fluorocarbons, Dry Chemical Powders, etc. Watermist does not have any effect on the ozone layer nor does it contribute to global warming.

Non-Conductive:

The droplet size is <100 microns. Such a small-sized droplet has little kinetic energy. Being light, it floats in the air and is non-conductive up to 35 Kva.

High Standards:

Built to high standards, which are in compliance with international quality standards.

Low Water Usage:

Watermist uses less water to put out fires, it also uses only 20% of the water a conventional water-based system uses.

Safe for People:

The small droplets of mist fall over a larger surface, creating a perfect barrier for thermal radiation, thus providing effective protection against fire for firefighters and people in the vicinity.

Post-Fire Damage Reduction:

About 80% of the damages resulting from a fire are not caused directly by the flames but by the extinguishing action. Since the mist, with an appropriate (high) degree of dispersion, fully evaporates in the fire environment, it leaves behind no collateral damage

Economical:

Water as an agent does not cost anything. Traditionally the amount of water required is significantly low. Which in turn means smaller water reservoirs and pumps with lesser construction and procurement costs.

An Alternative to Traditional Sprinkler System:

Can potentially replace a building’s sprinkler system as it works faster than water, resulting in less fire damage, and doesn’t soak the premises in the process of putting out the fire.

Please Note: This is NOT a complete kit and will need to customised to your location.